Full and Half Face Masks and Accessories

Allegro Full Face Peel Offs, 25 pk

These clear Polyester lens peel offs help protect your respirator mask’s viewing area from dust, splash, and debris. They are intended for use with our Full-Mask Respirator (PN 9901). They are disposable and easily attaches to the facemask with peel-off adhesive strips. Available in packs of 25. 

MATERIAL: 

• Polyester 

• .007 thickness 

SIZE: 

• 11” (27.9 cm) long x 4.75” (12.1 cm) wide

Allegro Full Mask Respirator

This comfortable full mask offers low pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way. NIOSH approved (TC-19C-0531)

LENS:

•  High impact polycarbonate (meets ANSI Z87.1
•  Wide field of vision with distortion-free replaceable lens
•  Anti-fog and anti-scratch coatings
•  Optional lens peel-offs available (PN 9901-25)

SUSPENSION:

•  Non-slip durable rubber five-point harness w/ mesh hairnet
•  Fits under hard hats
•  Unique adjustable buckle system to lock in place

Allegro Personal Air Cooler-9991

Vortex Tubes are an effective, low-cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot air streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. A fraction of the hot air is discharged at the control valve. The remainder of the slower air stream is forced to counter-flow up through the center of the high-speed air stream, giving up heat, through the center of the generation chamber finally exiting through the opposite end as extremely cold air.

CONSTRUCTION: Body: Aluminum Fitting: Hansen 1/4” (0.63 cm) plug (series 1000) Stainless Steel Belt: Nylon

BENEFITS: • Uses filtered compressed air • Provides continuous cool air delivery • Easy temperature adjustment even with gloved hands • No moving parts • Exceptionally reliable • A control valve allows for temperature adjustment • Will cool compressed air by 25° F (-3.9° C) • Requires an air supply pressure range from 50 -115 psi

Allegro Replacement High Pressure Full Face Mask Supplied Air Respirator

This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way. NIOSH approved (TC-19C-437)

LENS:

• High impact polycarbonate (meets ANSI Z87.1)

• Wide field of vision with distortion-free replaceable lens

• Anti-fog and anti-scratch coatings

• Optional lens peel-offs available (PN 9901-25)

SUSPENSION:

• Non-slip durable rubber five-point harness w/ mesh hairnet

• Fits under hard hats

 • Unique adjustable buckle system to lock in place

SEAL:

• Hypoallergenic and chemical/Ozone resistant

• Durable silicone rubber maintains shape while in storage

• Comfortable even in extreme heat and cold environments

• Double sealing flange and deep chin pocket for better face to mask seal

EXHALATION VALVE:

• Large diameter contoured exhalation valve design for minimal breathing resistance

• Easily accessible for fast replacement and cleaning

• Removable cover protects the exhalation valve form dirt, paint spray, and from freezing

DOWNTUBE & BELT ASSEMBLY:

• 90° elbow allows it to be directed over the shoulder and out of the way

• Corrugated flexible and lightweight material for greater comfort and less fatigue

• Three options available: o Flow Control Valve (20-50 psi) (1.38-3.45 bar) o Personal Cooler (50-85 psi) (3.45-5.86 bar) o Temp Controller (55-105 psi) (3.79-7.24 bar)

• Low profile nylon adjustable waist belt (included with high pressure controllers)

• Plastic clip to restrain airline hose from pulling on the face piece

Allegro Low Pressure Replacement Lens for 1 or 2 Man Fresh Air System (9901-09L)

•  Clear Lens,
•  For Use With 9901 Full Face Respirators,
•  Compatible with Brand Allegro,
•  Replacement Lens Only